Growatt 5000W Solar Inverter - 48Vdc to 220Vac (Single Phase), Off-Grid Pure Sine Wave Power Inverter with 100A MPPT Controller, Fit for Lead-Acid/Lithium and No Battery

Growatt 5000W Solar Inverter - 48Vdc to 220Vac (Single Phase), Off-Grid Pure Sine Wave Power Inverter with 100A MPPT Controller, Fit for Lead-Acid/Lithium and No Battery

5000W Pure Sine Wave Inverter DC 48V to 220V AC ((Single phase/A Hot Leg), built in 100A Mppt Solar Controller.

A new All-in-one hybrid Solar Inverter,

Max.PV Power：6000W,

Max.PV Input Current: 18A,

Max.PV Input VOC: 450V DC, PV Wire:10-12AWG,

Max PV Charging Current: 100A (mppt controller to battery)

• 5000W Solar Inverter Charger fit for 48V Lead-Acid, Lithium, User battery and without battery. Flexibly schedule the Inverter charging and discharging time, Support parallel operation for capacity expansion up to 30kW, max 6 units work together to support three-phase equipment (only with battery connected)
• 5000W All in One MPPT Inverter Compatible to mains voltage or generator power. Support WIFI/ GPRS remote monitoring, users can monitor the status of the PV system from their mobile phone or from the website anytime anywhere. (Purchased separately ).
• Solar Inverter has three charging modes are optional, i.e. Solar frist/ Solar and Utility / Only solar; and four output modes are available, i.e. Solar frist/ Utility frist/SBU Priority/SUB Priority, to meet different application requirements.
• The ground and neutral conductors of the SPF 5000 ES are NOT connected together and the enclosure does not become part of the ground return. It is safe to use 220 utility power in the United States.

Product Description

This is a multi-functional 230V off grid solar inverter, integrated with a MPPT solar charge controller, a high frequency pure sine wave inverter and a UPS function module in one machine, which is perfect for off grid backup power and self-consumption applications. This Hybrid inverter can work with 48V battery or without batteries.
 

Can be accessed to a variety of household appliances and office loads, power tools, industrial equipment, and electronic audio and video equipment, including refrigerators, lamps, televisions, fans, air conditioning and other AC loads

Important Note:

1. This is a wide voltage Hybrid inverter, The voltage that starts to connect to the solar panel must be above 150V for the Hybrid inverter to work normally. Connect solar panels in series, saving the cost of buying wires

The whole system needs other devices to achieve complete function - such as PV modules, generator, or utility grid.
 

1.       Rated power 5KW, power factor 1 MPPT ranges 120V~430V, 450Voc
2.       High frequency inverter with small size and light weight Pure sine wave AC output
3.       Battery charging mode and load working mode can be set
4.       Adjustable inverter charging and output time
5.       Solar and utility grid can power loads at the same time With CAN/RS485 for BMS communication
6.       Able to work without battery
7.       Parallel operation up to 6 unit (only with battery connected)
8.       The WiFi / GPRS module is a plug-and-play monitoring device to be installed on the inverter. With this device, users can monitor the status of the PV system from the mobile phone or from the website anytime anywhere.(optional, Additional purchase required )

WARNING! Be sure that all inverters will share the same battery bank. Otherwise, the inverters will transfer to fault mode.

Parallel operation up to 6 unit (only with battery connected)

This inverter can be used in parallel with two different operation modes.

1. Parallel operation in single phase with up to 6 units.

2. Maximum 6 units work together to support 3-phase equipment. Four units support one phase maximum.

WARNING!

All inverters must be connected to the same batteries and ensure each group of cables from the inverters to the batteries in the same length.

Important Note:

The ground and neutral conductors of the SPF 5000 ES are not connected together and the enclosure does not become part of the ground return.

Test Methods:
Use the multimeter's beep gear to measure whether the neutral wire and the ground wire are connected together, if they are connected together, it will make a "beep" sound. If there is no sound, there is no connection.

Battery charging mode and load working mode can be set

Utility Charging Mode

• Charging Algorithm: 3-Step
• Max. AC Charging Current: 80Amp
• Floating Charging Voltage: 54Vdc
• Safety Certification： CE
• Operating Temperature Range： 0℃ to 55℃
• Storage temperature：-15℃~ 60℃
• Dimension(D*W*H) : 485 x 330 x 135 mm
• Net Weight: 12kg

Line Mode Specifications

Input Voltage Waveform：Sinusoidal (utility or generator)

Nominal Input Voltage：230Vac (Single phase /A Hot Leg)

Max AC Input Voltage：300Vac

Nominal Input Frequency：50Hz / 60Hz (Auto detection)

Output Short Circuit Protection：Circuit Breaker

Inverter Mode Specifications

Rated Output Power：5KVA/5KW

Output Voltage Waveform：Pure Sine Wave

Output Voltage Regulation：230Vac±5%(Single phase /A Hot Leg)

Output Frequency: 50Hz

Nominal DC Input Voltage: 48Vdc

Surge Capacity: 2* rated power for 5 seconds

Package

• The 5000W ES unit x 1
• User manual x 1
• Communication cable x 1
• Software CD x 1
• Current sharing cable x 1
• Parallel communication cable x 1

Wiring Instruction

Wiring Instruction(when your system is split phase systems ( 120V L+ 120V L+ N+G) ,please take this as reference)
 

1.       Connect Ground wire to Ground terminal (Be sure to connect PE protective conductor first).
2.       Connect AC input L1 to Input L (Hot) terminal.
3.       Connect AC input L2 to Input Neutral terminal.
4.       Connect Output L (Hot) to AC output L1.
5.       Connect Output Neutral to AC output L2.
6.       DO NOT CONNECT AC INPUT NEUTRAL OR LOAD NEUTRAL TO THE INVERTER.
    

Important Note:

• This single-phase 220V solar inverter is an international version Which can be used in 220Vac single phase systems and as well as in 120V/240V split phase systems.
• This inverter charge can be connected to a separate 240V to 120/240 Volt split phase transformer(doesn't included) to get two separate 120V hot lines for 120V loads.
• This inverter only outputs 220Vac. It does NOT output 120Vac.
   

MPPT Solar Charging Mode

• Max. PV Array Power: 6000W
• Max. PV Input Current: 18A(pv to inverter)
• Start-up Voltage: 150Vdc±10Vdc
• Max. PV Array Open Circuit Voltage: 450Vdc
• Max. PV Charging Current: 100A (inverter to battery)
• Max. Charging Current (AC Charger Plus Solar Charger): 100A

WARNING：

• Do not mount the inverter on flammable construction materials.
• SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY.
• The ambient temperature should be between 0°C and 55°C to ensure optimal operation.
• Requested to install a separate DC over-current protector or disconnect device between battery and inverter.
• All wiring must be performed by a qualified person.
• It's very important for system safety and efficient operation to use appropriate cable for battery connection. To reduce risk of injury, please use the 2AWG cable. Max torque of 2Nm